PENERAPAN JSA SEBAGAI UPAYA PENCEGAHAN KECELAKAAN KERJA DALAM KEGIATAN PERBAIKAN INTERNAL PART & BURNER TILE
Abstract
In this company, annual factory repair activities or Turn Around (TA) is a periodic maintenance program of factory facilities, where various work activities are carried out in a certain period of time, and involve so many people with various levels of expertise and work skills. This research was taken using a qualitative research method, namely by describing how the application of Job Safety Analysis (JSA) is carried out on internal part repair work and burner tile replacement in Turn Around (TA) activities in accordance with existing conditions, developing commitments and policies, or ongoing processes. The results of the reseacrh obtained based on in-depth observation and interviews found several potential hazards in this work, including the fall of the workpiece (18 work steps) 2 medium and 16 high, height (13 work steps) 3 medium and 10 high, dusty conditions (19 work steps) 3 medium and 16 high, gas poisoning (16 work steps) 1 medium and 15 high, hot conditions (17 work steps) 3 medium and 14 high, pinched (11 work steps) 2 medium and 9 high, and sparks (5 work steps) 1 medium and 4 high.
The application of Job Safety Analysis in evaluating this job shows that comprehensive hazard identification, accurate risk analysis, implementation of effective preventive measures, and adequate training and supervision to ensure work safetyKeywords
Full Text:
PDFReferences
Ardinal. (2020). Analisa Keselamatan Kerja (Job Safety Analysis). Jakarta: Yong Ardinal Rhuekamp.
Arman, U. D., Melasari, J., & Suwanda, A. R. (2022). Identifikasi Penyebab Kecelakaan Kerja Konstruksi Menggunakan Accident Root Cause Tracing Model (ARCTM) dan Fault Tree Analysis (FTA). Cantilever: Jurnal Penelitian Dan Kajian Bidang Teknik Sipil, 11(1), 17–28. https://doi.org/10.35139/cantilever.v11i1.112
Balili, S., & Yuamita, F. (2022). Analisis Pengendalian Risiko Kecelakaan Kerja Bagian Mekanik Pada Proyek PLTU Ampana (2x3 MW) Menggunakan Metode Job Safety Analysis (JSA). Jurnal Teknologi Dan Manajemen Industri Terapan, 1(2), 61–69. https://doi.org/10.55826/tmit.v1iii.14
Dwi, A., & Andri, A. &. (2021). Pemanfaatan Data Mining Dalam Memprediksi Produksi Pada PT. X Menggunakan Algoritma Regresi Liniear Berganda. In Jurnal Nasional Ilmu Komputer (Vol. 2, Issue 1).
Huda, N., Fitri, A. M., Buntara, A., & Utari, D. (2021). Faktor-Faktor Yang Berhubungan Dengan Terjadinya Kecelakaan Kerja Pada Pekerja Proyek Pembangunan Gedung Di Pt. X Tahun 2020. Jurnal Kesehatan Masyarakat (Undip), 9(5), 652–659. https://doi.org/10.14710/jkm.v9i5.30588
Kurniawansyah, E., Fauzan, A., & Mustari, M. (2022). Dampak Sosial dan Lingkungan Terhadap Pencemaran Limbah Pabrik. CIVICUS : Pendidikan-Penelitian-Pengabdian Pendidikan Pancasila Dan Kewarganegaraan, 10(1), 14. https://doi.org/10.31764/civicus.v10i1.9658
Natsir, A, D., M, A., &, & Syahrir, M. (2023). Penerapan Safety Sign Pada Bagian Produksi Pt. Prima Karya Manunggal Berdasarkan Identifikasi Bahaya Menggunakan Metode Job Safety Analysis (Jsa).
Pradipta, Y. A., & & Pd, F. ,S. (2022). Analisis Penerapan JSA (Job Safety Analysis), JHA (Job HazardAnalysis) dan SOP (Standard Operasional Procedure) Sebagai Perangkat Keselamatan dan Kesehatan Kerja pada Kegiatan ProduksiPabrik Di PT. Sumbar Calcium Pratama, Kecamatan Lareh SagoHalaban, Kabupaten Lima Puluh Kota. Jurnal Bina Tambang, Vol 7, 165.
Putri, D. N., & Lestari, F. (2023). Analisis Penyebab Kecelakaan Kerja Pada Pekerja di Proyek Konstruksi : Literatur Review. Jurnal Kesehatan Masyarakat, 7(1), 444–460.
Satrio, E. M., & Wibowo, K. (2023). Penerapan Job Safety Analysis (Jsa) Dalam Menganalisa Keselamatan Dan Kesehatan Kerja (K3) Pada Proyek Pembangunan. Jurnal Teknik Sipil Dan Arsitektur, 28(2), 89–94. https://doi.org/10.36728/jtsa.v28i2.2533
Suherdin, S., & Sutriyawan, A. (2023). Kecelakaan Kerja Berdasarkan Loss Causation Model Pada Industri Informal Pengelasan. Journal of Industrial Hygiene and Occupational Health, 7(2), 151–166. https://doi.org/10.21111/jihoh.v7i2.8747
DOI: https://doi.org/10.35327/gara.v18i4.1161
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 GANEC SWARA
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.